Where can I buy Pump Control in Ghana?
PENTAX BRIO 2000 Auto Pump Control
The BRIO controller is an adjustable pressure sensor with dry run protection. The BRIO 2000MT is designed to automate operation of an electric pump. It can sense a drop or opening of a valve or tap. When the tap valve closes, the pump controller turns off the pump and re-pressurizes the system until the flow stops. The pump controller starts and stops the pump by opening and closing the taps. In installations with a?negative head’, the BRIO can be used together with shower pumps. Also known as the universal head. When the shower head is higher than the cold water storage tank’s water level, and where pumps are providing multiple outlets at once (e.g. Body jets or rain bars or domestic water supplies (toilets taps, washing machines, etc.) The BRIO includes a pressure gauge that allows you to easily check the system pressure and starting pressure. If the water supply fails, the unit will protect the pump from drying out. The MT model also features a timer that will attempt to reset the pump 4 times per 60 minutes in case of a shut down. This is subject to the 12 amp maximum electric load.
The BRIO can be used with clean water. A suitable filter should be installed before using the BRIO if there is any possibility of sediment.
This replaces the traditional water system setup (pressure switch, pressure tank).
After a drop of pressure (tap opening), the electric pump is started
The electric pump is stopped when the fluid flow reaches the maximum pressure (taps closing).
Protects against dry running
Adjustable starting pressure
Standard 1: Connections
It can be placed horizontally or vertically.
Easily replaceable circuit board
After a stoppage due to dry running, the automatic reset takes place. Standard time-interval 60 minutes/4 tests